“You’re going to have to get estimating software.” – Mike Holt

For those of you that are not familiar with Mike Holt, he is a well-respected author and developer of software, books and video training programs for the electrical industry. Click here for more information.

TurboBid is the only estimating software that Mike recommends. He has worked closely with the folks at TurboBid to ensure that it follows the same terminology and principles that he teaches in his estimating course.

TurboBid’s founder, Bill Ruffner, was invited by Mike to come down to Florida and take part in filming his new estimating DVD. During filming, Mike made the following comment that made a lot of sense. The truth is that most guys that open their own shops are coming out of the field. While they might have been great electricians, running a successful contracting company takes a whole different skill set. You’re going to have to decide to become a business person.

Mike said “You need to make a decision. The reality is that if you’re going to be a business person, you’re going to have to get estimating software. You need to make the decision that, ‘I’m going to be a business person’. Once you’ve made that decision, that’s your goal. Then number two is, ‘What’s your plan? How are you going to get there? What are you going to have to do?'”

Following is a video excerpt from Mike’s Electrical Estimating Deluxe DVD Package.

 

 

The concepts that Mike goes over in his video are very important to the success of your company. Every day that passes by without taking action is a wasted opportunity. You owe it to yourself, your family and your business to take a few minutes out of your day to see for yourself how TurboBid can help you win more profitable jobs and improve your professional image.

Give us a call at (888) 417-2458 x102 or click here if you would like to schedule a specific time for us to call you so that we can have a brief chat or live demonstration.

Why square foot pricing is not a good idea

The ultimate goal of any company is to make money. What determines if your company makes money? You simply have to sell jobs for more than what they cost you to do.

Contractors that use square foot pricing run the risk of losing money on jobs because they neglect to identify and account for all of their costs.

The description of neglect in Websters dictionary is “to give little attention or respect to”.

If a company’s ultimate goal is to make money, why would any contractor use a method of estimating that gives little attention to or respect to identifying and accounting for all of their costs? I have to believe that it’s simply because they don’t know any better.

Producing highly accurate estimates in a timely manner is not at all difficult if you know how to do it.

TurboBid provides a simple step by step process of estimating and bidding that allows you to systematically identify and account for all of the costs involved in a job.

We take great pride is our ability to personally help contractors become better business people. We have a passionate desire to help our customers succeed. Honestly, there is no better feeling in the world than receiving a letter from one of our customers thanking us for helping them provide a better life for themselves and their family.

Following is what needs to be considered when estimating and bidding on a job. Would you prefer to do all of this manually or would you prefer to use the power of TurboBid?

Material costs and labor hours

  • The fastest and most accurate method of estimating is to use assemblies. An assembly should include your material costs and the amount of time to lay out and install the assembly. TurboBid currently includes over 45,000 per-built assemblies.

Assembly maintenance screen

Material Cost

  • Your material pricing needs to be accurate. TurboBid allows you to easily keep your material prices up to date.
  • If applicable, add a percentage of the material cost to account for misc. material.
  • If applicable, add a percentage of the material cost to account for material waste and theft.
  • Add material sales tax.

Labor

  • Manpower: In order to calculate your labor cost, you need to identify the manpower that will be used on the job. Your manpower costs should include the following:
    • The employee’s pay rate per hour.
    • The employee’s burden cost. Burden is the additional cost that you incur on behalf of your employees. This is typically in the form of payroll taxes, workman’s compensation, general liability insurance, health insurance, paid vacations/holidays/sick days, benefits, bonus’, etc.
    • View our manpower selection screen
    • View our labor burden calculator
  • Pay Raises: You should account for any employee pay raises that are incurred in the middle of the job and add the prorated cost to the estimate. TurboBid does this automatically.
  • Skill Level Adjustment: The material labor units used in TurboBid are based on a typical journeyman doing the installation. If you have employees that produce at a lower rate, they will cause the job to take longer to complete. You must calculate the effect that this lower productivity has on the entire crew and add it to the estimate. TurboBid does this automatically.
  • Additional Labor: This is where most contractors leave money on the table. Your estimate needs to include all of the additional time that you’re paying your employees for. This can include things like job set up in the morning, packing up to go home at the end of the day, material handling, meetings, paperwork, sweeping, travel time, etc. These tasks can be for one-time only, per day or per week. TurboBid automatically calculates these costs and adds it to the estimate.
  • Type of Work: You can’t use the same material labor unit to estimate all types of work. For example, residential typically has a faster pace and more repetition than commercial work. You need to be able to quickly adjust your labor units to accurately reflect the type of work that you’re estimating. TurboBid does this automatically.

Misc. Expenses

  • Misc. Direct Job Expenses: You must take the time to identify and account for all of your misc. direct job expenses.
  • Subcontracts: You need to add any costs for work that you’re paying a subcontractor to perform.
  • Tools: You should not only account for the cost of new tools that a job will require you to purchase but you should account for the cost of using your existing tools as it relates to tool replenishment. TurboBid automatically calculates this cost and adds it to the estimate.

Direct Cost Detail

Your estimate should clearly display the calculated values for all of the above.

Overhead

It is vital that you know your true overhead costs. Overhead is what it costs to run your company. It includes costs such as office personnel, vehicle expenses, advertising, office supplies, utilities, cell phones, etc. It’s basically all of the costs that your company incurs simply because you are in business. It has nothing to do with direct job expenses. TurboBid includes a calculator to assist you in determining your overhead expenses. It also includes the ability to break down your overhead cost into a rate per hour. In our opinion, this is the most accurate method of adding overhead to your estimate.

Profit

The are two steps in determining the price to provide to your customers.

  • Estimating: Estimating is the process of calculating how much it will cost you to do a job. This is also known as your break-even cost.
  • Bidding: Bidding is deciding how much to sell a job for. You simply need to decide how much profit to add to your break-even cost.

When I was contracting, almost all of my customers wanted to negotiate a lower price. If I only had a dollar for every time I heard the phrase “you have to go back and sharpen your pencil”, I’d be a rich man.

When negotiating a job, you have to decide, how badly do you want the job?

  • Maybe it’s for a new big customer than you want to develop a relationship with. This is also known as buying a job.
  • Maybe things are slowing down and you need the job to keep your key employees.
  • Maybe you need cash flow to cover your overhead expenses.
  • Maybe you need a paycheck.

Before I created TurboBid, I have to admit that, for whatever reason, I wanted to win every job that I bid on. What used to drive me completely out of my mind is that I didn’t know how low I could go before I would lose money on the job. At the time, I relied on my gut instinct but in reality, when I look back today, I didn’t have a clue. I’m cringing right now thinking about how many jobs I probably took at below cost.

One of the biggest benefits you’ll find in using TurboBid is that you’ll know your break-even cost. You’ll be in a position to negotiate your bid price without the risk of losing money. If it comes down to it, you’ll be able to tell your customer with conviction that as much as you want to do their job, if you lower your price any more, you will lose money. At that point, tell them in no uncertain terms that they need to be very careful about awarding the job to anyone that claims they can do it for less.

View our Bid Price Detail tab

View our Bid Price report

For more information, please visit www.TurboBid.net or call (888) 417-2458 Ext 102

Click here to download a free trial of TurboBid